Willert9
You should not be giving out advice when you clearly have no idea what you are talking about. All dodge Chrysler Jeep products have automatic relearn on the TPMS system. Solid light means low tire pressure flashing light means one or more sensors are not working correctly or you just have installed new sensor on the vehicle and it needs to be relearned. On these make vehicles all you do is drive the vehicle up to 15 mins but usually will go out within 2 minutes
SOURCE: How do I reset my tire pressure light on my 2004
With the factory air pressure monitoring system of the dodge vehicles the light should automatically reset when the tire is reinflated to the proper pressure. If the light remains on after adjusting the air pressure then the problem lies at one of the individual sensors located at the valve stems on the rims
SOURCE: how do i reset the
This should automatically reset upon proper tire inflation. If you are still getting a low pressure light then the RF chip in the tire is faulty and needs to be replaced. These are rather expensive and can be purchased from dodge.
SOURCE: Reset Tire Pressure Sensor on 2007 Dodge Caliber
Hello
Welcome, If you have driven over a month and it has not reset there is a problom with one of the 4 sensors, You will need to have the TPMS scaned to see witch sensor is not working,, Here is a link explainin this in detail
http://www.chryslertpms.com/
SOURCE: Reset the Tire Pressure Warning light.
well it depends, if you have just reset the tire pressures, the light should go off by itself, if it doesn't then you have a bad tire pressure sensor. If you have replaced the sensor, it must be programmed into the WCM by the dealership.
SOURCE: I have a 2008 dodge
There is a pressure sensor in each wheel one of them is bad it's pretty common
21,602 views
Usually answered in minutes!
×