Why is my fuel gauge on my honda accord 97 always at full?

SOURCE: i need 1996 honda accord speed sensor plug wiring diagram

Diagram is courtesy of honda

[IMG]http://i34.tinypic.com/10wjogi.jpg[/IMG]

SOURCE: Wiring Diagram for 1996 Honda Accord EX

hondahookup.com

SOURCE: 1990 honda accord temp gauge above hot limit.

Hi there,

Firstly - DO NOT run engine, when guage reads hot, as this will cause costly damage to head gasket & alloy engine head.

The fact that guage takes 1min to read HOT, would confirm the guage IS working properly.

So, other components which are likely to cause hot readings (in this order) are:

- lack of coolant (or leakage somewhere): is there sufficient green coolant at the correct level? Top up mixture to correct level. Repair any leaks.

- collapsed radiator hose: when engine is cold, start engine, then quickly watch both upper & lower radiator hoses to see if either begins to flex inwards (collapse). Replace if either hose is collapsed.

- bad/incorrect thermostat rating : when replacing thermostats, you must ensure it is of the SAME temp rating (they all differ).

- Incorrect Temp sensor rating: the ratings of this sensor must be within manufacturer's spec's.

- bad waterpump: the engine relies on the waterpump to distribute the coolant throughout the entire system. If waterpump is faulty, coolant will not flow quick enough, causing overheating.

If you still believe all of the above components are OK, then have your cooling system "pressure tested". This test should be done, before looking further at other electrical components.

Cheers,

"if this has helped you in any way, please rate this solution"

SOURCE: 1997 Honda Accord Diagram for 97 honda accord fuse boxes

I NEED A DIAGRAM LAYOUT OF MY 97 HONDA ACCORD FUSE PANNEL THATS UNDER THE DASHBORD DRIVER SIDE