SOURCE: how to change head light bulbs on a dodge caliber
Park the Dodge Caliber on a flat paved or concrete surface. Turn the steering wheel all the way to the side opposite the headlight you are replacing. In other words, if you are replacing the left headlight, turn the wheel all the way to the right. Apply the parking brake and release the hood latch.
SOURCE: 2007 dodge caliber transmission light is on
Hello
You'll notice what appears to be a dipstick tube at the front of the vehicle on the drivers side, and it should have a warning label to use CVT oil. But when you remove the top, there's no stick. The dipstick itself is a "special tool" (Miller No. 9336). The stick is marked for fluid levels for different temperatures, although there is an acceptable range.
Read the instructions carefuly that come with the tool
Thank you!
SOURCE: i need an owners manual DODGE CALIBER HATCHBACK
Try to look in this link -->> dodge.com/en/owners/manuals
Hope helps (remember to rate and comment this).
SOURCE: how do I reset the oil light on my 2009 dodge
once oil has been changed turn key to on press the gas pedal 4 times turn key off.the change oil light will reset. ur ready to go.
SOURCE: Need to know what alarm code 9ASCAP means on 2009
It actually reads (GAS CAP) it has detected that you left the gas cap off or is loose.tighten down and it will be ok
280 views
Usually answered in minutes!
×