Tail light
SOURCE: 2007 jeep liberty drivers side
When motor is all the way up do you hear a rattling in the door?
SOURCE: replacing tail light on Jeep Liberty
So you already have the screws out. You simply have to pull it out. It probably have a small plug or *** on the back side to help hold it in place. YOu can pull the unit fairly hard on it with out breaking it, just be firm with it and it should come right out. I'm not sure about the 3rd light, how it is mounted as well. Are you just changing the light bulb in it or changing the cover? If your just changing the bulb or cover you should just be able to take the screws out of the cover and use a small screwdriver to gnetly pry it off.
SOURCE: need a tail light wiring diagram for 2005 Jeep Liberty
I advice you don’t cut into the wiring harness but get the proper kit that is plug and play.
SOURCE: 2005 jeep liberty brake lights will not work. I
brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.
SOURCE: jeep liberty 2007, window regulator died. What is
take off door panel and tap with a small hammer
287 views
Usually answered in minutes!
×