98 gs 4oo codes p1346 the car shakeing when in drive and when i slow down

I look up your code. Meaning of code is vvt sensor range/performance problem bank 1

possible causes
faulty variable valve timing vvt sensor
variable valve timing sensor harness is open or shorted
variable valve timing sensor circuit poor electrical connection
engine control module

The flashing engine check light means a code is being stored in the computer. You need to have this code read and this will tell you what system is malfunctioning.

Might be.
Code 1346 is for a problem with the variable valve timing sensor.

Did you just change timing belt?

P1346 Variable Valve Timing Sensor / Camshaft Position Sensor Circuit Range / Performance, but I am not sure.


You can get a Mini VCI to clear code, it is widely used in Toyota cars. and really a cheap tool.

Check Engine Light On, P030x Specific-Cylinder Misfire Code A cylinder specific misfire indicates that either compression, appropriate fuel mixture, or spark is missing. Start with a visual inspection, looking for a vacuum leak near the cylinder and any sign of wear on the spark plug wire. Check the compression on the target cylinder to ensure that the engine is mechanically sound. Use a stethoscope to listen to the suspect cylinder's fuel injector. Listen for distinctive clicks and compare to another cylinder.

P0330 Knock Sensor 2 Circuit (Bank 2)
P1133 Air/Fuel Ratio Sensor Circuit Response Malfunction (Bank 1, Sensor 1)
P1135 Air/Fuel Ratio Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)
P1346 VVT Sensor Range/Performance Problem (Bank 1)
P1349 VVT System Malfunction (Bank 1)
P1351 Variable Valve Timing / CMP Sensor Range / Performance
P1354 Variable Valve Timing System Fault

NOTE:Variable Valve Timing (VVT) sensor is also known as camshaft position sensor.
The Variable Valve Timing (VVT) system controls intake valve timing in response to driving conditions.

Possible causes are:

1. Incorrect valve timing P1346, P1349, P1351 & P1354
2. Faulty oil control valve P1346, P1349, P1351 & P1354
3. Faulty VVT controller assembly P1346, P1349, P1351 & P1354
4. Faulty ECM All Codes
5. Jumped timing belt All Codes
   
6. Faulty Camshaft Position Sensor P1346, P1349, P1351 & P1354
7. Faulty O2 Sensor (Bank 1, Sensor 1) P1133 & P1135
   

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

Definition of Diagnostic Trouble Code P1346 Audi: Ignition Coil Power Output Stage 3 Short to B+ BMW: Misfire During Start Cylinder 3 Buick: Intake Camshaft Position [CMP] Sensor System Performance Cadillac: Intake Camshaft Position [CMP] Sensor System Performance Chevrolet: Intake Camshaft Position [CMP] Sensor System Performance Ford: Fuel Level Sensor B Circuit GMC: Intake Camshaft Position [CMP] Sensor System Performance Lexus: VVT Sensor Rang/Performance Problem (Bank 1) Lincoln: Fuel Level Sensor B Circuit Mazda: Fuel Level Sensor B Circuit Mercury: Fuel Level Sensor B Circuit Oldsmobile: Intake Camshaft Position [CMP] Sensor System Performance Pontiac: Intake Camshaft Position [CMP] Sensor System Performance Saturn: Intake Camshaft Position [CMP] Sensor System Performance Toyota: VVT Sensor /Camshaft Position Sensor Circuit Range/ Performance Problem (Bank 1) Volkswagen: Ignition Coil Power Output Stage 3 Short to B+

i have got the same problem with terios
i fix it with multiscan plus and gives me p1346 valve timing
i erased it but it comes back again !!