I replaced the clutch master cylinder on my 93 Dodge Stealth ES, bled the line a couple times . The clutch grabs about 2" from the floor but the pedal doesn't return to the normal position. Does that mean I need to bleed it some more?
You need to "pump" you clutch, this will take several times. When you push it to the floor release it and push it again. It will return to a normal position. You might even have to pull the pedal up to push it down, but keep pushing it until it's tight again then check the reservoir to make sure it's full (the air bubbles will come to the top inside the reservoir.)
Yes
560 views
Usually answered in minutes!
clutch bleed valve
×