These lights all turned on at once today when I got on the free way. Nothing seemed to happen to the car itself, but it was below freezing this morning, the check air pressure light came on (I will check tire pressure today) But are those related? What do I do with the other stuff? Do I need to take it in?
Check all the Fuses. especially the one that may be common to all. i don't have a Manual here. I advise you, to go get a manual, for around $30 , at the Parts Store. Look at the Wiring Harness and Fuse Blocks. They come together somewhere. Also, you did not mention the red Brake Lamp. Is it on? If so that will possibly disable, all the above.
SOURCE: AdvTrac light remains on all the time and "check AdvTrac" message
You will have to retrieve and clear codes from VDM module with a scan tool. You may also have to calibrate it as well.
SOURCE: our abs light advtrac light
You may have a bad wheel bearing--do you hear a growing noise that gets louder with speed? The wheel sensors on your wheels are sensitive to excess motion between the wheel hub and the wheel, as they have a small gap between the sensor and the tone ring on the axle. The speed sonsors are used by both the ABS and the traction control systems on your truck. You can check your bearings for failure by jacking up the car and trying to shake the wheel. If the wheel doesn't have noticeable play, the bearing may still be bad enough to cause the sensor to misread the speed. If you're not sure, have your mechanic check the wheel bearings. If you have more questions, please let us know.
SOURCE: have an 05 ford explorer. The ABS, ADVTRAC lights
Hello and welcome to FixYa!
You may just have system failure and I suggest that you remove the positive battery connector. Let it sit for atleast 5mins. or more before reconnecting it. This will reset the system and can get your vehicle back to it's normal operation.
Hope this helps and thank you for using Fixya! Have a good one!
2,305 views
Usually answered in minutes!
×