Need link to 1998 isuzu rodeo relay/fuse diagram

Question edited for clarity, add maker.
Question moved to model category.

The is no 'EDM' fuse. Do you mean 'ECM'?

Engine Control Module, the engine main computer that makes everything work.

Isuzu Rodeo / Amigo (1998-2004) fuses and relays

Fuse-Box.info https://fuse-box.info > isuzu > isuzu-rodeo-amigo-199...

Here you will find fuse box diagrams of Isuzu Rodeo / Amigo 1998, 1999, 2000, 2001, 2002, 2003 and 2004, get information about the location of the fuse ...

..

Sorry to hear. Check all the fuse inside the car and all the fuse outside inside the engine compartment. If everything is good, check for inline fuses and fusible links in the wiring.
Follow the wires from the fuse and look for burn out wires etc. Do you smell any burn smell?

You need an auto electrician to find and fix the short to ground. They come to you and it is less expensive than a garage. Their professional scan tool computer can diagnose electrics.

https://www.google.com/search?q=mobile+auto+electrician+near+me
8 10 Charging system: back up lights; electronic engine control
Rodeo / Amigo

https://www.autogenius.info/isuzu-rodeo-1994-fuse-box-diagram/

.

Crystal, this is what I found on the Rodeo starter fuse/relay.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
99 Isuzu Rodeo LS Underhood Fuse Box Diagram Circuit Wiring Diagrams
1997 Isuzu Rodeo Question Fuse Box Diagram Electrical Problem
1999 Isuzu Rodeo Main Fuse Box Diagram Circuit Wiring Diagrams
1998 Trooper Relay Solenoid Starter 1998 Isuzu Trooper All of

1998 rodeo
what lights, you wean the cluster warning lights are dead.
or the cluster park , illimunation lights are dead.
are parks working (outside)
are head lights bright? outside)
wont start, does that mean it wont CRANK?
that means the starter is silent or is just a click

nobody can answer (correctly) lacking those facts.


1: check all fuses.
2: head lights work if not battery terms are rusty clean them.?
3: key on.
4: CEL lamp must glow, (check engine light) if not fuses blown or battery is dead. for sure.
4: tune key to start, does starter spin crank shaft fast?
ill stop here. my wild guess is you will not get this far.

no engfne even stated.
why not say what "not working" means.?
Engine cranks ok but will not start, RIGHT?

Ill pretend fuel pressure is 0 PSI cranking right.

IMMObilzer light glowing? bingo.
interial switch tripped (was in a crash>?)see photo below...
The PCM sees dead spark so cuts all fueL? sure.
(it will, if it does?, scan it yet? cranking, that be first.)
The PCM can cut fuel for many reasons.
2 dead sensors, and spark dead on the tacho line.
1,2,3 bam
and immo set. 4
and the inertial switch, if fitting many are not.
what matters most (1st) is 12vdc to the pump actual cranking, does it have 11vdc at least>?
if you see 12vdc and PSI is 0 or not spec cranking
at the rail, then the filter can be clogged.
not just a dead pump,, i cant hear pumps cranking so.... i use TOOLS> to see whats going on.

to a DIY, vast answers.
1: makes noise.
2: fuel rail drips or not.
3: 12vdc missing to pump or not, cranking?
4: 0 (zero) PSI pressure at rail cranking
????????????????????????????

under the bonnet u will find a black plastic box that not only has fuses but also relays in it . on the reverse side of the plastic cover it has a diagram of which is how you will locate the relay u are after , , locate the one you are after, even swap with another that is the same just to test it out. hope this helps

Go to any shop and have them listen.

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following 2 LINKS. They have the Serpentine and Timing Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies:
For the Serpentine Belt:
http://www.2carpros.com/car_repair_information/year/1998/make/isuzu/model/rodeo/1998_isuzu_rodeo_drive_belt_routing_diagram.htm
For the Timing Belt:
http://www.2carpros.com/car_repair_information/year/1998/make/isuzu/model/rodeo/1998_isuzu_rodeo_timing_belt_diagram_marks.htm

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1998/make/isuzu/model/rodeo/1998_isuzu_rodeo_timing_belt_diagram_marks.htm