97 s10 4x4 blazer valve body replacement

Chevrolet / GMC / GEO Transmission Look Up Table

www.autorepairmanuals.biz/page/372807

Blazer, 1993-, 4L60-E. Blazer, 1994 - Up, 6.5L V8 Turbo Diesel, 4L80-E. BLAZER/TRAIL BLAZER/JIMMY, 1995-2003, 4 SP RWD/4X4, L4 2.2L L6 4.2L V6 4.3L ...

Transmission Applications - GM Automatic Transmissions

www.gmautomatictransmissions.com/transmission_applications.php

Avalanche, 2001-06, V8 5.3L 5.7L 6.0L, 4 Spd RWD/4X4, 4L60E. Avalanche, 2004-06... Camaro, 1994-05, V6 3.4L 3.8L, 4 Spd RWD, 4L60E. Camaro .... Monte Carlo, 1997-05, V6 3.8L (W/S.C.), 4 Spd FWD, 4T65E. Monte Carlo ... Silverado, Sierra,1500-3500, 1995-06, V8 4.8L 5.0L 5.3L, 4 Spd RWD/4X4, 4L60E. Silverado ...

4L60E Transmission Rebuilt ' eBay

Are you replacing it? The info you gave should be enough for a dealer or parts store to look up the right part.

No the trans has to come out and completely apart. Do not attempt without trans overhaul experience.

97-98-99-2000

how many miles on the tranny your put in? those don't last any more then about 120-140. the sunshell breaks, you should replace it with "the beast"

all shifting is in the valve body, you don't need to remove the tranny again. If your going to open her up and start wrenching, get a video/book on the 4L60E, you will start with check electrical components

There are a couple sights where I found GREAT info about 4L60E repair!! I'm new to tranny's but because of these sights, my first total rebuild is almost done!!

http://www.compnine.com/largeimg/940419GM04-418.gif is a blow-up schematic of the valve bodies

http://forums.minnesotamud.com/showthread.php?t=3032 is a step-by-step (text and pics) of a total tranny break-down!!

Hope it helps. Let me know!

Barney
[email protected]

no it will not sorry

NO the converters and valvebodies are wrong. 1 is PWM modulated and other is not.!

sorry but your stuck with the 4l60e if you want it to be right. as for using the bravada transmission thats fine you just have to use your transfer case. your transfer case uses a switch on the dash and an electric motor on the transfer case. the bravada uses a series of sensors on the front and rear axle that sense wheel slippage and send a signal to the electric motor on the transfer case causing it to lock in four wheel drive. when the sensors dont sense wheel slippage any more the system returns to two wheel drive. that,s why they call it smart track. just unbolt your transfer case from your transmission and bolt it to the bravada transmission and install it. p.s- dont forget to at least change the front pump converter seal. for 4 or 5 bucks it,s cheap insurance against a major leak and i dont think you want to pull that transmission out again and yes i saw that happen to many times. good luck.-G.J.M

THE VALVE BODY IS LOCATED INSDIE THE TRANSMISSION PAN UNDER THE TRANS FILTER