NOTE: Ford has extended the warranty for the brake booster for most 2010-2013 Edge and MKX vehicles. They will now cover the brake booster up to 10 years or 150K miles. There was a letter sent to owners with subject of "Customer Satisfaction Program 13N02" Before attempting repair see if your vehicle is eligible
SOURCE: install power brake booster on 1988 ford ranger
REMOVAL & INSTALLATION
NOTE: Make sure that the booster rubber reaction disc is properly installed if the master cylinder push rod is removed or accidentally pulled out. A dislodged disc may cause excessive pedal travel and extreme operation sensitivity. The disc is black compared to the silver colored valve plunger that will be exposed after the push rod and front seal is removed. The booster unit is serviced as an assembly and must be replaced if the reaction disc cannot be properly installed and aligned, or if it cannot be located within the unit itself.
Fig. 1: Check the booster pushrod adjustment using a gauge with the shown dimensions
Fig. 2: Exploded view of the typical power brake booster
Fig. 3: Booster vacuum hose connections - 2.3L & 2.9L
Fig. 4: Booster vacuum hose connections for the 4.0L
SOURCE: 2007 ford edge, three lights are on: ABS, wrench
it sound like a ABS-sensor is sticking are its bad give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.
SOURCE: 1989 ford thunderbird std brake system vacuum booster install?
There are a Couple of Different Variations on the Boosters. Make sure that you have the Correct one First. If you do, Just work it, Some of the Rods are Removeable by the Way.
SOURCE: replacing a brake power booster
you need to be bendy to get linkage undone under dash at pedals..remove brake master and away..unbolt booster and away you go..good luck
11,136 views
Usually answered in minutes!
We just replaced the brake booster and now the brake lights stay on. What did we do wrong?
how did you resolve this problem?
×