Anonymous Posted on Feb 19, 2009

Old owner chopped blower motor wiring - need pinout for resistor

97 jeep grand cherokee limited

The previous owner chopped the blower motor resistor wiring and completely removed the resistor from the system. The person had done it because the old resistor melted and also melted some of the wiring harness. I have no idea what the pinout should be for the resistor. This vehicle has the ATC (automatic temperature control) resistor, not the one in the manual control ones.

Thanks!

1 Answer

Anonymous

Jeep Master 6,982 Answers
Posted on Feb 19, 2009

Anonymous

Jeep Master

Joined: Nov 07, 2008

Answers

6982

Questions

Helped

2647557

Points

22782

It might be beneficial to you to go to a scrapyard and take a look at one that hasn't been chopped up! You may even want to buy whatever has been removed while you are there!

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I need a wiring schematic diagram for a 2000 Grand Cherokee Limited Blower Fan Resistor Module

bingo !

http://www.fixkick.com/look/odds-ends/jeep/2000GC-heater-motor.JPG

Read full answer

Dec 21, 2013 • 2000 Jeep Grand Cherokee

0helpful

1answer

I need a wiring diagram for the blower motor on a 1999 jeep grand cherokee limited. I have two wires sticking out of the blower motor and I don't know where they go

Usually you have to splice the wires into the old plug.
You might be able to find a diagram on the websites for auto parts stores such as autozone.

Read full answer

Jul 06, 2012 • 1999 Jeep Grand Cherokee

0helpful

1answer

Blower works intermittently. The cooling is fine...just no push at times for cool air. Blower motor appears to be fine also. Is there a sensor or other that needs replaced? 2002 Jeep Grand Cherokee...

Check where the wires go into the blower housing. There is usually what appears to be a small plate held by 1 or 2 screws that the wires plug into. This is the speed control resistor. If it's going bad, it will cause the problem you describe.

Read full answer

Jun 21, 2011 • 2002 Jeep Grand Cherokee

0helpful

1answer

I replaced the resistor box and 2 green and one blue wire. all i got was a spark no blower and a blown 40 amp fuse help 2000 jeep grand cherokee limited

Either something was mis-wired, or you have a shorted blower motor or a cut in the wire insulation that is shorting to ground. I'm amazed that a 40 Amp fuse is used for the blower motor - that is a lot of current for a motor that size. (13.6 Volts times 40 Amps is 544 Watts for a fan?! There must be some other stuff on that circuit or somebody put in an oversized fuse.)

Read full answer

Jan 15, 2011 • 2000 Jeep Grand Cherokee

1helpful

2answers

2002 grand cherokee limited with auto climate control. no heating problems until today...now no air movement at all. the heater blower will not turn on even after moving switch from auto to low/high. had...

most likely the blower motor try tapping it if it makes a noise or starts blowing a replacement is necessary

Read full answer

Jan 02, 2010 • 2002 Jeep Grand Cherokee

0helpful

1answer

Blower motor resistor replacement

how do the wires go on a 2002 jeep grand cherokee blower motor resister.

Read full answer

Oct 18, 2009 • 2002 Jeep Grand Cherokee

2helpful

1answer

Need a wiring diagram for 2002 jeep grand cherokee limited blower motor resistor

Review this links:
- WJ Section 24 Heating Air Conditioning ewj24 (page 32 and next)
- WJ Section 08w Wiring Diagrams ewj8w
* page 19 Index
* page 221 Blower Motor - Diagram 8W-42
- Blower Motor Repair

I hope help you with this (rated this help) Good luck.

Read full answer

Sep 30, 2009 • 2003 Jeep Grand Cherokee

1helpful

1answer

I need a wiring diagram for 2003 jeep grand cherokee limited blower motor resistor

Enjoy!

Read full answer

Jun 05, 2009 • 2003 Jeep Grand Cherokee

0helpful

1answer

Ac blower won't work. Resistor has been replaced 3 times. I think it is the problem now. Is it easy to replace? Where is it?

Blower motor resistors are found on the pasenger side ducts near the blower motor. It should have three wires going to it.

Read full answer

Apr 22, 2009 • 2000 Jeep Grand Cherokee

7helpful

3answers

2001 Grand Cherokee Limited a/c Blower Motor not working

Try wiggling the connector on your Blower Motor Resistor. They are known for having a bad connection and melting the connector. Check on Ebay, I bought a new harness kit on there. It was easy to install, just cut off the old connector and splice in the new. The colors match so there is no guessing which wire goes where. Only cost me $12 and saved me $300+ that the dealer wanted.

Read full answer

Jul 23, 2008 • 2001 Jeep Grand Cherokee

Not finding what you are looking for?

View Most Popular

1997 Grand Cherokee

Cars & Trucks

I need a wiring schematic diagram for a 2000 Grand Cherokee Limited Blower Fan Resistor Module

2000 Jeep Grand Cherokee

407 views

Ask a Question

Usually answered in minutes!

Check Out the Latest Top Trucks Report!

View all Fixya Reports

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for 1997 Jeep Grand Cherokee? Or just drag it here!

Related Topics:

Old owner chopped blower motor wiring - need pinout for resistor