I have a Nissan maximum that is a straight drive and it stalls out when changing first second or 2nd to 3rd gear what would cause thisI have a Nissan maximum that is a straight drive and it stalls out when changing first second or 2nd to 3rd gear what would cause this
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
may hav burn a shift solenoid--put car on a scanner--local parts place does it for free--nomerical codes will show and explained in a manual--but bfore replacin a part a more detailed scan shud b performed
Most likely the second gear section of the transmission has gone bad. There are 3 or 4 different gear sections or assemblies in an automatic transmission, when they go bad, they go bad.
What you need to check is the transmission release bearing because if there is a clearance on the release bearing you will encounter this problem and also check the transmission oil.
do not flush the trans, that will make it worse.
My friend you have no second gear, you need trans rebuilt.
If you flush it now you can cause more damage.
you need to replace clutch pack for that gear can be ordered seperately from parts store or dealer if you want to save money call peach street auto recycling at 1800-365-2341 for a warrantied used one! also might be time for change trans filter and fluid filter could be slightly clogged but I lean towards clutch pack I replace these alot on Hondas
when accelerating, it wont go past 30mph. It redlines after 30mph.
automatic won't change gear
I have a Nissan maximum that is a straight drive and it stalls out when changing first second or 2nd to 3rd gear what would cause this
×