Radio Code I have a 2000 mitsubishi diamonte and my radio is asking for a code? What is the code?

Need to visit the dealer; keep in mind that this code number is unique for each vehicle.

Bring VID# to dealer and ask. Try 1411

Many radios have theft protection that require a code once power is lost. Look in the owner's manual, as it should be written down by whomever installed it.
Otherwise anyone selling that brand of radio can just reset the code to a new one, and tell you the new code.

Mitsubishi codes are only available from the Main Dealer or a Radio Decoding Service.

They are not available for free as access is required to the original factory database ...which is not commercially available....Sorry

call mits elec at 8004244707 or panasonic tech hotline with model and serial number of your unit. They can furnish you with the original security code

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/thomas_c50676e836a18949

Its just a radio code which I managed to enter some numbers. Thanks

Get your VIN and go to a dealership. If you ask real nice they will probably give you the code to unlock your radio for free.

GETTING THE RADIO SERIAL NUMBER: <BR>
2000 - Carefully take the front panel off that surrounds the radio and temperature buttons, it will snap straight out. Wiggle the radio out about two inches, it is a tight fit. Get the serial number off the radio. It is on a sticker on the top, left side. Call a Mitsubishi dealer with the serial number. They will want proof of ownership, so have the title ready. After putting in the four digit serial number, hit the cd button and that enters it.The code is also written on an antitheft card that comes with the car and may be written in the owners manual in one of the back pages.
<BR> 1999 - Carefully remove the cup holder by pulling it out, then you will see the sticker with the radio serial number.
<BR> Other Years - I don't know an easy way to get the radio serial number, find a radio install savy person and ask them to help you. My dealership said they would do it for me and charge me for 30-60 mins worth of labor.. (At $75/hour) <BR> <BR>
RADIO SAYS "OFF" OR "LOCK": <BR>
Leave the "off" display on for 1 hour uninterupted, then it will automatically reset back to UNLOCK CODE.
<BR> When you turn it back on again after that time has passed it will ask for "code". <BR> <BR>
RADIO SAYS "UNLOCK CODE:" <BR>
Call your local MItsubishi dealership and ask for the service department.
<BR>They have a computer program where they punch in the serial number from your radio (you have to supply the number) and it will tell them the UNLOCK CODE for your radio. My dealership offered to give it to me free over the phone, if I knew my radio serial number. Enter the code using the buttons on your radio. And write the code down, this will show up everytime your radio looses connection to its power source - the car battery.

I had the exact same problem, I contacted Mitsubishi and they gave me the code.  All I had to have was the serial # (the number you have is the model number - the Serial # is on top of the radio, you will need to pull the radio out a bit to read it) and of course your VIN.  Their contact statement on their website is as follows:

For questions regarding your Mitsubishi vehicle, please contact Mitsubishi Motors North America, Inc. at 1-888-MITSU2009.

I hope this helps you out with your issue!

mitsubishi montero sport 2000 need radio code