How do you replace the ignition switch in a 1997 GMC Sierra Truck ?
Take off the cover on the top and bottom of the steering column just behind the wheel. pop the tilt lever out simply just by grabbing it and give it a good tug. then once you have the new switch and you get in there your going to need an inverted torx socket to remove the small bolts that hold the switch to the column. do not move the gear on the new switch make sure it lines up exactly as the old one did!!!!!!!!!!!!
SOURCE: 1997 GMC Sierra Truck Ignition Switch
its a long process,you need a steering wheel puller, once its off take the hazard button assembly out, take the turn signal loose, pull old ignition out, carefully install new one, and reverse procedure and always if u get confused i would highly recomend
a chiltons manual they explain things great
2,593 views
Usually answered in minutes!
i have a 2000 Gmc Sierra truck does not start the first attempt start until the 3rd attempt
I need to find where the reverse light switch is on a gmc sierra 2001
×