2005 chrysler town /country won't go in reverse but moves forward fine

SOURCE: low speed fan relay for the 2005 chrysler town and country

If you are talking about the cooling fan relay for the radiator there is no low speed and high speed relay. There is only one relay and it is behind the grill revitted to the bumper rail. It is doesnt look like you typical relay.

Colin Stickland

• 22516 Answers
• Posted on Sep 12, 2009

SOURCE: Chrysler trouble code U110C on 2005 chrysler town

encrypted software ,dealer only----yes i know you are showing a reading but it doesnt mean anything or if it does it shows a different code .so your snap on or mac tools scanner is a waste of time and money.Nearly all new motors from 2005 are using encrypted software to stop general mechanics like me from working

SOURCE: power door locks on 2005 chrysler town and

There is an ecu flash for this repair. You may get the locks to start working again with a battery disconnect.

SOURCE: 2005 Chrysler Town & Country Service tire

Maybe when you change the tires they remove or broke one or the four sensors located inside the rim or wheel, at the inside of the valve, this sensors transmit the low pressure to the computer, and if one, or all, are removed or damaged, computer will register it at as a low pressure tire

SOURCE: how to replace a thermostat in a 2005 chrysler

First of all drain the antifreeze by disconnecting the coolant hose. On the driver side of the engine, there is a radiator hose that connects to the engine just under the wires for the spark plugs. There are two bolts. Remove the bolts and pull off the hose. Some coolant will leak. Remove the old thermostat and gasket. Note how the thermostat is oriented so you can replace the same way.Now after the new thermostat is placed,follow this procedure:--Remove the radiator cap and start up the engine. You have to wait for it to become hot for the thermostat to open up and circulate the coolant. Add additional coolant to the radiator. After it is circulating, re-fit the radiator cap and see if the temperature gauge is rising as expected. ------ This will help.Thanks.Helpmech.