My 2002 Camry low beams aren't working. High beams only work when I pull the lever back. If I let it go or turn high beams on they don't work. Day running lights work, just not the low beams.

Light switch faulty looks like,

The high and low beam lights use the same power source, so if the low beams work the high beams have power.
There is a low and high beam relay controlled by the dimmer switch.
If the low beams work and the high beams don't, and the bulbs are good, check the dimmer switch and the high beam relay.

ck for power to bulbs ck fuses ck switch

HAve you check fuses?

I don't know what make of vehical you have but on most cars you pull the lever back to flash someone and push it forword to turn on to turn on the highbeams. Just a idea.

ok, first ,, check all the bulbs again, and *** make sure that your hands never touch the actual bulb, these lights will turn the oils from your hands into cooking grease when it comes to these bulbs and cause them to blow out much to early on in their life span, , next,, Pull the light switch ( high beam switch towards you for a quick flash of the head light high beams,, if this doesn't make the high beams come on, your problem is going to be in the switch itself ( what your calling the high beam/turn signal lever) before going to that extreme though,, if you have a junk yard near you, go pull one of the relays off a junked vehicle, and stab it into your system one at a time, it could be something as simple as a relay heating up and disconnecting prematurely due to heat ,, if you don't have a junk yard that you can grab a relay,, here is a link that shows how to check them, But its time consuming http://www.youtube.com/watch?v=C8t25GjZ6i4&NR=1

my suggestion is that you check/ replacr the HDM(headlight driver module) relay in the main fuse box located under the hood near the battery.

mostly wires problem but it that will happen again try to check your bulb alright.thanks

it sounds like a bad light switch

Pull your lever back if the high beams work that way you need a new high/low beam switch, if they do not you need to replace headlight bulbs.