A P1698 code is described as PCM Fault, No CCD Messages from TCM Conditions. It's triggered when the key is on, and the PCM did not detect any CCD messages from the Transaxle Control Module (TCM) for 10 seconds. Time for a trip to the dealer unless you feel like inspecting the wires & connectors leading to/from the TCM. Usually I tell people to go to the dealer when there are TCM problems! They can read any codes stored in the TCM that a regular code reader can't get. Good luck.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Could be different problems. The cluster issue could be a problem in the printed circuit board inside the cluster. The cooling fan problem could be low coolant, a blown fuse, a faulty temp sensor, fan motor, or relay.
Take the van to an autoparts store and have them scan the computer for any fault codes it has stored. Most parts store will do the scan for free. The check engine light means that the computer has noted a fault in one of the van's systems. Getting the codes will help identify the problem. Hope this helped and best wishes.
unfurtanetely the the board is burned out due to moisture on the wiring, you may have to replace the board but keep in mind that the wiring must be dry.
Light is NOT ON FOR OIL CHANGE I DO KNOW this Right off , Check Engine Light Illuminates For Many Different Reasons, Yon
Need to Have it Checked for WHAT FAULT CODES ARE IN the ECM<= Computer this or These Code's Will Give Information As to What the Problem is It MAY BE Something Very Simple. If you Have NOT Noticed a Change in The Vehicles Preformance it Shouldnt Be A Costly Repair. Best thing to Do it( Have It Diagnosed >=Get The Fault codes FIRST ) then Come Back here Online to FixYA And Its LESS LIKELY THAT You Will BE CHeated If you Have Knowlage Before you take it in For Repair Of the Problem.Have A Great Day and By the Way What is 23 Cel. = to in USA Fer. ?
The p1698 code is for the (bus) that is how the computers commmunicate with each other and also how the scan tool talks to the computers.
There is a common problem with these vans, that would be a good place to start. The battery will leak acid onto the wires underneath the battery. If you remove the battery and battery tray you will be able to see the large wiring harness under the battery. Inspect all of the wires underneath the battery for damage.
×