REMOVAL - 2.0, 2.4, 2.4L TURBO
The Crankshaft Position Sensor is in the front of the engine
block just under the starter motor (CRANKSHAFT POSITION SENSOR LOCATION). Disconnect the negative battery cable.
Raise vehicle and support.
On 2.4L SRT-4 remove the lower inner cooler hose from the metal tube.
Remove the Structural Collar (Structural Collar and Bending Strut-(Automatic Transaxle Equipped) ), refer to the Engine, Structural Collar Removal and Installation section.
Unlock and disconnect the electrical connector to the crankshaft position sensor.
Remove the crankshaft position sensor bolt.
Remove the sensor. Arrow points to sensor in picture.
Appreciate the advice but getting to the starter is not that easy.
how to replace timing belt on 2004 pt cruiser
I just installed an aftermarket cd player into a 2004 PT Cruiser. All of the speakers work except for the tweeters. All that I am getting through them is static. I purchased the wiring harness for the PT Cruiser, but still only have static in the tweeters.
my pt 2004 cruiser is leaking alot of oil when i turn my car on.
what type of oil do i use for my 2004 pt cruiser
remove and reinstall engine
2004 starter motor where is it located on the engine. and the solenoid where is it located?
×