The car starts fine but won't go into gear
SOURCE: 1998 honda crv vibrates when starting out
Increased vibration from a vehicle indicates worn out engine supports. This vibration often disappears when revving the engine high, but is very noticeable at low revs.
You can have these inspected and possibly replaced to reduce the vibration cominf from your engine.
Hope this helps.
SOURCE: 2002 HONDA CRV COLD ANTIFREEZE LEAK
this happens alot on older vehicles most often times because the coolant hose shrink and expand around a fitting. try and tighten all coolant clamps. this often is all it takes to solve the problem. you should also look to see that all seals around heads of engine show no seepage
SOURCE: Car slow to start in the morning, will start after
I'm assuming you've solved this problem since posting. What was the issue?
SOURCE: after engine shampoo, engine won't start on 2001 honda crv
You got ignition system wet, remove the distributor cap and check for water, i bet you will find it wet. you will need to dry it out even by using a hair dryer to dry it out, then try to start it. i would let it run for a while with hood open to allow moisture to flow out from under the hood to avoid other components from getting wet. let me know the out come good day.
128 views
Usually answered in minutes!
×