Remove bezel from around instrument panel , take your time not too break the bezel , block wheels pull shifter down into 1st if automatic and then take bezel cover loose and unplug wiring frrom switches .
be careful not too break these pieces they r usually very easy to break
then remove four retaining screws and gently remove cluster and unplug wires .
install in reverse order
SOURCE: change drivers side door panel on 94 chevy p.u.
unscrew the inside handle and pop of the window arm....then slowly work your way around the panel poping loose the plastic rivits on the inside edge...lift panel upwards to unhang it from window lip...thats the plastic panel...the metal panel inside that is pretty self explanitory..unscrew and take off the clips holding the controle arms to it and remove...do use caution as parts are very sharp and will slice your fingers and hands.
SOURCE: I have a 1989 chevy pickup c2500 what is the fuel
Hello! If you have the TBI engine it should be 9 to 13 pounds - if it's the SFI, it should be 40 to 55 pounds.
Hope this helps, and thanks for using FixYa!
180 views
Usually answered in minutes!
×