Question about Cars & Trucks
1994 Camaro Z28. Fuel pump is working. Plenty of fuel in the fuel rail. Starter turns over the motor, but the car will not start.
So then the next questions are - - do you have spark to the plugs and power and pulse ground to the injectors ?
Posted on Feb 01, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Check/Change Fuel Filter(s), PVC Valve & Emission Hoses
Gas that sits too long won't fire easily that's why we have to add winterize to our lawn mowers!
Try filling the tank with some high grade fuel cleaner additive. This stuff is like rocket fuel (about $10).
Also add a can of dry gas as you may have a lot of water and water vapor in your system!
Get a couple more cans of starter fluid too. (I always needed at least two to get my diesel running for summer)
Keep spraying and starting (It always took me at least a full can sometimes 2)
When it starts keep the gas pedal down and rev high for a good 5-10 minutes then see if it will idle.
If it still stumbles and falls consider adding another can of fuel system cleaner and/or dry gas.
Don't drain the tank as this usually just makes it worse by letting the bottom sludge stir up.
Never let your gas tank get too low as this will foul up your fuel system and always add fuel cleaner after every oil change (a must for fuel injection and cat. converter care)
PLEASE RATE THIS!
Posted on Mar 08, 2009
Have you tried to pull any DTC codes. Here is a link for you so you can pull some codes, but you may have a bad Ignition Control Module (ICM) it's around $40.00 at Auto Zone and they can give you the step by step instruction to replacing it with common tools. The ICM is common to go bad after a few years due to time and corrosion. It's location is under the rotor in the distributor, as it heats up if fails or any changes in the engine speed. Check the wires to make sure there are no damages. Keep me posted be glad the help. http://www.troublecodes.net/GM/
Posted on Jun 26, 2009
sounds like the injector got stuck close because of sitting so long....take em out and cleasn them up real good an try that it should work make ensure the wires have a good solid connection and no bent pins.
Posted on Oct 05, 2009
Tips for a great answer:
Sep 09, 2015 | 1994 Chevrolet Camaro
Nov 27, 2013 | Cars & Trucks
Oct 14, 2017 | 1994 Chevrolet Camaro
Jun 19, 2011 | 1991 Chevrolet Camaro
Jan 18, 2011 | 1994 Chevrolet Camaro
Dec 03, 2009 | 1994 Chevrolet Camaro
Jan 28, 2009 | 1994 Chevrolet Camaro
Oct 15, 2008 | 1995 Chevrolet Camaro
Nov 17, 2019 | Cars & Trucks
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: