Question about 2005 Chrysler Town & Country
When going over any kind of uneven surface, a "knocking" or "clunking" sound comes from the front suspension (or some steering component?). The car is a 2005 model.
Link arms no good need replacing,easy job,common fault
Posted on Feb 08, 2009
Pretty common item on those is the upper strut mount & bearing assy. If it sounds like front wheel area. If it feels like it's under your feet, stabilizer bushings. Mounts are about $50 each roughly, but don't try to install yourself unless you have proper compression tools & are experienced at that particular job, as it could get very dangerous.
Posted on Jan 31, 2009
Same problem. 2002 t&c. 71K miles. Quick-Strut assemblies made it better, but didn't solve. After that, Sway bar bushings! $13 for the pair. Possible to accomplish with 15mm deep socket, 000 steel wool and a pair of vise-grips. Ratcheting wrenches would've made it a one hour job. Driver's side is kind of a pain. Omaha
Posted on Mar 07, 2010
If you are holding the brake and the problem goes away it is somethng loose on the caliper/braket. I also had the same problem and had five different mechanics including myself try and diagnose it. At first we replaced the upper control arms thinking it was the ball-joints but the noise was still there.I found that the caliper mount of the right side was a little loose so i switched it over to the driver's side and the sound moved with it. We concluded that the problem is in the caliper mounts. Give it a shot. From Spencer Espinola at Old Colony Automotive Technology
Posted on Dec 04, 2009
I had the same problem and it was the swaybar bushings as well.
Posted on Nov 02, 2009
I replaced all of the suspension parts, and there is still a noise, that is hard to figure out since everything is new. So I just play the radio a little louder now so the wife doesn't complain.
Posted on Nov 26, 2014
Here is the solution to the problem and I had the same thing and was fixed after...Replace the brakes. The factory brake or some after market (mostly factory) have the anti rattle clips that are not working like they should after some miles are put on. Here is a link to read about the issue...http://www.complaints.com/2008/october/13/Rattling_anti-rattle_clips_on_car_188747.htm
Please let me know if this helps anyone else. I thought it was control arms, etc... and it was not!!!!
Posted on Mar 04, 2010
Had this problem it was the sway bar bushing. cost $30 bucks.
Posted on Mar 12, 2009
You will need new struts and/or shocks
Posted on Jan 31, 2009
Stabilizer links , or sway bar bushings
Posted on Feb 08, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 25, 2014 | 1997 Chrysler Town & Country
Nov 04, 2017 | 2001 Chrysler Town & Country
Nov 07, 2012 | 2001 Chrysler Town & Country
Sep 27, 2012 | 2003 Chrysler Town & Country
Aug 15, 2010 | 2001 Chrysler Town & Country
May 29, 2010 | 2001 Chrysler Town & Country
Mar 24, 2009 | 2001 Chrysler Town & Country
Mar 07, 2009 | 2006 Chrysler Town & Country
9,399 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: