Marks on the oil pump belt and timing belt
SOURCE: need diagram showing timing adjustment for a 1992
Check the position of the timing marks. The timing pointer mustbe perfectly aligned with the TDC (white mark) on the flywheel orflex-plate; the camshaft pulley must be aligned so that the word UP isat the top of the pulley and the marks on the edge of the pulley arealigned with the surfaces of the head. Additionally, the face of thefront timing balancer pulley has a mark which must be aligned with thenotch on the oil pump body. This pulley is the one to the left crankwhen viewed from the pulley end.
Also, in here, 1994-Honda-Accord-Coupe-Section-01-Engine (page 47 and next / TDC marks) you can find referenece information about Accord Engine.
If you need more details, visit autozone.com (free register) and select your model vehicle.
I hope help you (remember rated this help) Good luck.
SOURCE: 1992 honda accord ex timing belt
yes this engine is a interference engine. Make sure you did not bend the valves when it boke.
SOURCE: 2000 Honda Accord's Timing Belt and Water Pump
sounds like your timing belt is a little to tight and the vibration from the belt is the humming you here
loosen the belt but you may want to call the dealer for the spics on tightness of the belt . thx
SOURCE: 1992 Honda Prelude Timing Belt Diagram
There's no such thing as a timing belt diagram.
Do you mean to say the "Procedure" for changing a timing belt in a 92 Prelude?
By asking such a question I can only interpret it as a clear indication that you've never changed a timing belt before.
If this is true, then you don't want to start out or practice on your own car.
Get the car to a pro and have the job done right.
If not true (and you've changed timing belt's in the past)
Then give me the engine size and I'll post the:
"PROCEDURE" for changing the belt in a few hours.
357 views
Usually answered in minutes!
×