What is the spark plug gap on a 2001 3.4 Toyota Tacoma

SOURCE: How do you change the spark plugs on a 2007 Toyota Tacoma?

bring it to a garage

SOURCE: how do I change my spark plugs on my 2002 toyota

On the V6 engine The drivers side plugs are easy although the passenger side will require you to remove the intake boot and the coil packs, easily done with a 10 mm socket and ratchet. Disconect the coil pack connectors by depressing the plastic clip and pulling them off one by one on the three coil packs . leave the plug wires attached and pull the coil pack straight up and off the spark plug.Blow out the area around the plug with compressed air to prevent debris from entering engine when the plugs are removed. Use a 5/8 spark plug socket and a 8 inch extension bar on your 3/8 ratchet at remove the plugs. use anti seize on the new plugs, gap the plugs to manufacturer specs and install your new plugs 2. If its a 4 cyl engine its actually a bit more difficult. The intake boot assembly has a bracket that bolts to the valve cover and side of the engine and you must remove it to access the 4 coil packs on top of the engine. once again the coil pack wires must be disconected and the coil packs un bolted and removed from the valve cover to access the plugs. Blow all dirt from around plug with compressed air to prevent foreign objects or dirt from entering the engine when you remove the spark plug , once again use a 3/8 ratchet and an extension with your 5/8 spark plug socket and remove plugs, use a small amount of anti seize compound on the threads of the nes plugs and gap them to manufacturer specs before installation. Also while the coil packs are off,, Inspect them for ARC Tracing a white residue and line may form on the coil pack Tip/boot if you see alot of ARC tracing Id suggest replacing that coil pack. Especially if you have a misfire condition.

SOURCE: how do i change the spark plugs in my toyota

if it is v6 remove upper intake manifold