Toyota seina '04/ Check engine lights on, VSC light on, Trac off light on, engine runs, but gas pedal does not work. It happens when jump starting with cables wrongly connected.

ROBERT GARCIA

• 926 Answers
• Posted on May 03, 2009

SOURCE: Why is the vsc light check engine light and trac

to reset for a momentany malfuntion,disconnect the negative battery terminal few minutes, reconnect,start engine and drive to check

SOURCE: Check engine and VSC lights on

that the check engine light is on indicates a problem. that the light is not flashing indicates that the computer does not think that the problem is all that bad. without some other vehicle malfunction symptoms best advice i can give you is to take your vehicle to a place that has a code reader and see what codes it has stored. some car parts stores will retrieve the codes for free, idea being that the parts store can then sell you some parts to fix the problem. but you don't have to buy anything, you can just have them read the codes. some of the parts stores will give you a printout of the codes too. get the codes and you know what the computer is not liking, then you can make a more informed decision about what to do next. hope that helps.

SOURCE: toyota 2001 4 runner vsc lights on and trac

Those lights always come on whenever the check engine light is on.It could be from the gas cap not being tight enough or an air hose in the engine compartment coming loose. I recommend bringing your vehicle to someone that can read the codes and reset the lights for you. The codes will narrow down what the problem really is.

ROBERT GARCIA

• 926 Answers
• Posted on Jul 30, 2009

SOURCE: my check engine, VSC light and trac light are on

try to reset for a momentany failure, disconnect the negative battery terminal few minutes, then reconnect and start engine

SOURCE: 2004 Toyota 4Runner, Regarding The VSC TRAC and VSC OFF lights

Check your switches for the VSC, some get bumped on (due to their location) and some get stuck in the "on"position.