Need timing diagram for 93 plymouth acclaim

Hi Nick, I'm Al the owner of Big A's Auto Repair
Which Diagram do you need on your 93 Plymouth Acclaim.
Example: Engine vacuum diagram, wiring diagram if so what for, and so on. For further assistance go to my website. have an awesome day Nick.
Auto Repair

well this is what you have to do send the cylinder head to a machine shop for any internal damage check any bend valve install a new water pump new timing belt and problem solve

the distributor rotor should be pointed towards the #1 plug wire on the distributor cap.mark on the distributor housing where the rotor is pointing.put the crankshaft so the 0 timing mark on the timing cover is pointing to the slot mark on the crankshaft pulley(harmonic balancer).the cam timing mark will look like an oblong hole with a slot mark(one on each side)of it,the oblong hole should face up and centered on the head surface (not a little of center one way or the other).this is how the marks should be lined up.assuming this is a 4 cylinder motor.

GOOD IF YOU COULD FIX IT YOUR SELF.OR TAKE IT TO ANOTHER MECHANIC.IF YOU COULD FIX TIMING BELT THEN DO A COMPRESSION AND A CYLINDER LEAK DOWN TEST AT EACH CYLINER WITH CLOSED VALVES.VALVE COVERS NEEDS TO BE OFF BEFORE YOU CAN SEE VALVE CLOSED POSITION.IF AIR BLEEDS MORE THAN 40% YOU HAVE BENT VALVES YOU WILL HEAR AIR GUSH AT INTAKE OR OUT EXHAUST PIPES.YOU KNOW VALVES BEEN.I REMEMBER I HAD 1977 CHEVY MONZA TIMING BELT BROKE.BY GOOD LUCK AND GODS WILL DIDNT DAMAGE VALVES NOR PISTONS PUT NEW TIMING BELT ON ENGINE RAN FINE.WHEN MY TIMING BELT BROKE ALL MY PISTONS WAS MIDWAY OF THE ENGINE.THAT SAVE MY VALVES AND PISTON. LIKE I SAY DO BOTH TEST FIRST THEN YOU WILL KNOW IF ENGINE DAMAGED.

The diagram for belt routing on 1994 Plymouth Acclaim.

For the 1992 Plymouth Acclaim:
Click on the following free, direct Link. It has several Seprentine Belt Diagrams, including one to match your specific 1992 Plymouth Acclaim with the unspecified Engine: 2.5L SOHC In-Line 4-Cylinder or 3.0L SOHC V6; and the unspecified Engine Options (AC/No AC ect.)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1992/make/plymouth/model/acclaim/1992_plymouth_acclaim_drive_belt_routing_diagram.htm

Not as bad as you may think. The belts inside goes on the grooved pulleys, the back side of the belt goes on the smooth pulleys.

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!
http://www.2carpros.com/car_repair_information/year/1993/make/plymouth/model/acclaim/1993_plymouth_acclaim_drive_belt_routing_diagram.htm

If you go to autozone.com, and look up timing belt for your vehicle & engine, it has repair guides available, with pictures.

I was having the same problem with my 93 Acclaim. I needed to have the fuel sending unit in the gas tank replaced.