SOURCE: Replacing a starter for a 1999 Altima
the bolts should be on the drivers side.
you will have to crawl underneath the car to do this task
SOURCE: Need an ecu wiring diagram
what is the car doing?? by you saing "need a ECM diagram?" what is the problem with the car. that car is pretty bulletproof and I have't seen any ECM issues unless your A/C drain is clogged up and water leaked onto/into your ECM frying it up. Let me know what your symptoms are.
SOURCE: Howm do I replace a starter on a 1995 Nissan
Nissan 240SX/Altima 1993-1998 Repair Guide
Altima
(see Figures 1, 2 and 3)
Fig. 1: The starter is located to the left of the oil filter housing on the engine block
Fig. 2: The starter motor is removed from the bottom side of the engine compartment
Fig. 3: When installing, be sure to align the starter's mounting bolt holes with those in the engine block
To install:
Hope helped with this (remember rated this help) Good luck.
SOURCE: NISSAN VANETTE CARGO DELIVERY 2.3 D LD23
two wires ,feed to the B+ and the other to the small terminal
1,226 views
Usually answered in minutes!
×