If starter is good still, Check the battery connections on the battery and at starter. Clean then shiney. Check also the solenoid wire connection from the switch at the starter solenoid. Be sure it's clean and tight also. Then just be sure the battery is up to par.
SOURCE: WIRING DIAGRAM FOR 1984 AMC EAGLE
well you have several options you can go to a dealship and have them copy the diagram for you(i do this all the time) or you can purchase a repair manual at Napa or Oreilly's for around 20 bucks. it has diagrams and schematics in it. it also has alot of instructions in it so you can do repairs yourself. By the way i'm surprised that the mechanic doesn't have these diagrams himself. I was wandering why it won't start after you changed the plugs and wires could it be that maybe the firing order is wrong. i've done that myself a time or 2. double check the the plug wires to make sure they are in the right spot. if the problem is it won't crank. chances are you have a loose ground. please rate this..thanks
SOURCE: The belt keeps coming loose
You need to replace the alternator belt.they have a bolt which you loosen the belt. the belt probably got loose because this "tension" bolt was not properly tightened. the noise you hear is the belt slipping on the pullies. to replace it loosen the tension bolt until it is lose enough to remove the old belt. replace the belt with one of the same thickness and length. Be sure to tighten the bolt to where the belt will have about a 1/2 inch pressing down on it firmly with your thumb. you may have to remove some other components ( the fan for example) to replace the belt but thats questionable.
SOURCE: I need an AMC Eagle 1981 Belt Diagram.
Hi there,
The Gates Corporation,s website;
http://www.gates.com/index.cfm
will help you identify which belts & hoses fit your vehicle, or any vehicle as long as you know what engine is in it!
Cheers, Stevie-RayG
SOURCE: I got a new Standard starter Solenoid SS-590 but
i dont think your car has the type of cumputer that there talking about
SOURCE: amc eagle 1984 the starter wont dis engage.
You either have a problem in the ignition switch or the starter selonide.
222 views
Usually answered in minutes!
×