SOURCE: se prende la luz de check engine
Fault Code P0135 Sensor Heater Circuit Malfunction (Bank1 Sensor 1)
Sugiero cambiar sensores de oxigeno: www.oxygensensors.com
Debes haber notado variaciones en el consumo de combustible, entre otros detalles (modificacion de ralenti).
Suerte.
SOURCE: QUE TAL SOY CLAUDIO BERTON DE MENDOZA ARGENTINA, I
Saludos Claudio:
Sugiero visitar al representante de la marca; esta es muy especifica y no existe informacion de referencia en el Web acerca de este tema. Lo siento.
------------------------------------------------------------------------------------------------------
Iveco Assistance Non Stop ofrece tanto la asistencia en ruta
como el traslado del vehiculo hasta el concesionario mas cerca.
Con
solo realizar una llamada telefónica 0800-44- IVECO o 0800-44-48326 , profesionales
calificados asisten al instante el vehiculo.
Además si el
vehiculo esta en garantía el servicio es completamente
gratuito y
con prioridad de reparación en el momento del Service.
------------------------------------------------------------------------------------------------------
Suerte.
SOURCE: como ponerle el codigo a el stereo de un audi a4
IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Volkswagen dealer!
You can find the radio code at: http://www.radio-code.co.uk/
The sequence of programming for 2001 Audi A4 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
80 views
Usually answered in minutes!
×