2005 silverado door locks

How to fix the Chev power window door lock switch - YouTube

? 5:04
https://www.youtube.com/watch?v=XDKaDURD8Sc
Jul 13, 2013 - Uploaded by spelunkerd
How to fix the Chev power window door lock switch ..... Some time later my drivers side window stopped working in the down position. ... These intermittent electrical problems are frustrating,aren't they? .... How To Install Replace Door Locks Chevy GMC Truck Silverado Sierra Yukon Tahoe Suburban ...

Diagnose Power Door Locks Dont Work Properly - Auto ...

www.auto-repair-help.com/.../diagnose_power_door_locks_dont_work_...

An inoperative power door lock can be caused by the switch, solenoid, wiring problem or ... Hi, I have a 2005 Nissan Sentra and the power locks aren't working. .... Hi, mypassenger door locks/unlocks both doors but my driver side door works independently and .... I have a 1986 Chevy Silverado K10 with auto door locks.

SilveradoSierra.com • 2003 silverado no power in right door ...

www.silveradosierra.com/.../2003-silverado-no-power-in-right-door-t30...

Power actuator not working

Probably is the actuator. Common problem. The actuator is part of the complete door latch. Hopefully that is what you got from 'Dorman'.

I assume you mean that the central locking system will not lock the doors but you can do so manually.

Get inside the vehicle and close all doors.

On each rear door, lock and unlock the mechanism manually a couple of times. In other words do not use the key pad.

Then leave both rear doors in the locked position (manual locking) and operate the lock button on you key pad to operate the central locking system. Wait a few seconds then hit unlock on your key pad and a few seconds later hit lock on your key pad.

If the system fails to lock your rear doors you will need to get the vehicle to an auto electrician to check out the issue and rectify it for you. There are a number of possible causes which cannot be identified without physically checking the system. So you will need to have this rectified by a professional.

we have a 08 1500 crewcab chevy that all the power door locks worked excepted the drivers door. We started to look at that door power lock actuater and now the passenger power door lock does not work. Could the trouble be something other than actuaters?

this is posted in your owners man. i think you need to pull the high beem switch back and then hit the door locks once for on and twice for off depends, i have a crew cab so they have more door unlock lock choices

Make sure the meter is connected to body ground instead of door ground. Does it neither lock or unlock? You will only see power when the switch is operated. All locks operate from a common fuse. Check for wire pinch at the door hinge area.

try punching the remote lock button twice. experience with 4 door s-blazers shows that it has to be done twice to lock all 4 doors. also look for "child safety" switched for the rear doors that may be disabling remote locking for the rears.

It is the door lock actuator and its real easy their are a few cover plates on trim remove and take out the srews then take off the interior mirror cover / then take the door panel lift upwards and out the after you get the trim panel off the latch has three bolts on outer take those out and disconnect rods be careful they dont break and just reverse it to put it back together