Spark plug locations
SOURCE: Need spark plug gap for 94 Mercury Sable 3.0L
Listed in the owner's manual and under the hood on a placard. Also the parts store where you buy the plugs can supply this info.
SOURCE: How do you access the spark plugs 2002 mercury mountaineer
IIRC these are a coil over design. meaning the coil is over the plug. the coil should have one 8mm bolt holding it on the lower intake manifold. remove the coild to get to the spark plugs. look by the fuel injectors, coil should be just next to it or very close. coil usually says motorcraft on it and circle in design.
good luck
Michael
ASE certified
SOURCE: where are the spark plugs located on a 2000 Mercury Grand Marquis
There are eight COPs (coil-on-plugs) to remove. Using a 7mm or 9/32" socket, remove each bolt securing each COP to the intake manifold on top of the engine. Remove all eight COPs, and the spark plugs are underneath. When replacing the spark plugs, use only the proper Ford/Motorcraft plugs, even if they cost twice as much as the aftermarket ones. You will avoid further headaches this way. Hope this helps.
SOURCE: digram of firing order for spark plugs, for 1991 mercury sable
For the 1991 Mercury Sable 3.8L V6:
Firing Order:
1-4-2-5-3-6
Cylinders:
.....(back)....
|...1...2...3...|
...................
|...4...5...6...|
......(front)
Distributor:
....(back)
......6..(+)-screw
1..........3
4..........5
(+)...2
....(front)
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
329 views
Usually answered in minutes!
×