SOURCE: Rough Ideal on 2004 Ford Explorer
Open hood and listen for vacuum leak sound. pcv hose is most likley cause.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/terry_db4da071b7da3ac1
SOURCE: Ford Focus Engine problem
have you tried having your fuel injectors cleaned on it. the engine might not be getting enough gas at take off. it might also be that your gas tank fuel pump or the other fuel pump going bad
SOURCE: 1994 ford ranger extended cab 6 cyl fuel injected 2 wheel drive automatic
This year of ranger had a few flaws, In one case, a break power booster was robbing the vacumm, you can test this by plugging it off and seeing the differance, but you will have limited brakes. This model year had a problem with a vacuum leak on the manifold. You can check these in many ways, but please don't use starting fluid. The rear of the manifold usually on the drivers side where it seals to the block.
Also, in 2 other cases a cracked head has gave me the same problem. It is caused from a loss of vacuum.
SOURCE: 2003 Ford Expd. running rough @ idle -
There could be many issues. These codes read your engine is running too lean. Check : all your vacuum hoses for leaks, PCV valve and hose, MAF sensor. This may require an experienced technician to figure this out. Hopefully I help'd!!
SOURCE: Ford F150 engine backfiring, running/idling rough
I Have a 1999 ford f150 4.6 that back fires and is just running really ruff when idling alot of nack fire a sord of like a pulse going on what is my problem?
107 views
Usually answered in minutes!
×