Before any parts are replaced, it needs to be determined if the brake pedal switch is being actuated properly and functioning properly. After that, the interlock solenoid needs to be checked, as well as the linkage.
SOURCE: 2002 GMC Sierra 1500 rear brakes
The first problem that I see is.....
You got screwed, the rear brake shoes and the parking brake shoes and the same thing. The parking brake uses your back brake pads to set the brake.
Sorry man
SOURCE: 2002 GMC Envoy Brake Lights Don't Work
It involves a little tricky manouvering under the dash to reach the switch and you need to be very aware of the orientation when fitting. PLEASE BE AWARE that you are messing with the brake pedal and if you fit this part incorrectly you could interfere with the brake pedal travel and cause a dangerous driving situation. Only fit this part once you have fully inspected the part to be removed, and preferably look at a workshop diagram. Some switches are easy some are not. Most take me 10-15 mins.
SOURCE: the gear shift on my 2004 gmc envoy does not move from park.
cheak the brake pedel swich it work a swich in the gear seleter
SOURCE: My 2002 GMC Envoy is stuck in the neutral position
i would try to get down to the linkage adjustment and see if maybe it is not adjusted properly or if it jumped out of alignment. Place the transmission in park and the selector in park after loosening nut and then tighten down the nut.
376 views
Usually answered in minutes!
×