Just eject them backwards from 6 until 1 that worked for me
SOURCE: How do I remove a headlight bulb on a 2006 Lincoln
remove 2 10mm bolts attaching top of headlight to the radiator support.
remove plastic clip attachinig headlight to top/front of fender.
remove 5 phillips screws on top of grill.
carefully pull out grill enough to remove 1 10mm bolt attaching headlight to radiator support and use slotted screwdriver or prybar to seperate headlight tab from the bracket that goes under the bumper cover.
with a little effort and wiggling pull out headlight assembly.
SOURCE: 2005 Lincoln Aviator 5 disc
TRY REMOVING THE RADIO FUSE & WAIT A WHILE. IT SHOULD RESET WHEN PLUGGING THE FUSE BACK IN.
SOURCE: cd player on 2001 lincoln ls - cd error when i press load button
My father inlaw just purchased a 2001 lincoln, with a six disc changer, Question is he loaded the unit ,and now he wants to eject the cd's and the changer won't open? any suggestions thanks
SOURCE: 2006 Lincoln Zephyr - Static on radio with rear window defroster
check for antenna ground if corroded relocalize the ground.
SOURCE: car windows will not roll down. garage door opener does not work.
I DON'T KNOW ABOUT THE WINDOW PROBLEM - SOUNDS LIKE A FUSE.
FOR THE DOOR OPENER GOTO HOMELINK.COM
THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.
PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.
HOPE THIS HELPS
Hello
The engine
and automatic transmission in this vehicles drive train
are fully electronically controlled by a computer called the PCM and
TCM (Power Train Control Module, Transmission Control Module). When a
problem like this or other drive-ability related problems occurs the
computer stores a record of the problem (there are of course some
exceptions to this, like the fuel pump, engine coolant temperature
sensor and MAF sensor for instance) in the form of a fault code in
its memory, to read these fault codes you must have the systems
memory scanned with a special tool. Once the fault code(s) are read
you then must perform the appropriate diagnostic testing to find and
resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL
A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR
HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM
1,385 views
Usually answered in minutes!
×