Safe code for audi A3 2001 auz1z1

IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 1997 Audi A4 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready for use!

You need to contact Audi Dealer and provide your VIN# (It's an anti-theft deterrent issue) TIP: when you get the code, write it down in your glovebox w/a Sharpie (just in case)

IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

Also you can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Please do rate my response. Thanks!

you can call any audi dealer and they can tell you the codes and how to do it for free here is a number for one 1 866 576 0107 in us.

try this site
www.radio-code.co.uk

call the audi dealer with your cars vin number and they will give you the code. hope this helps you

:-)

Sure, I understand.

OEM means Original Equipment Manufacturer, and my question was, is the radio the original for this car, or was it installed later as a swap or replacement?

On my VW, safe will come up initially, then 1000, then a short time later, it will resume normal operation, after you turn it on the first time.

Do you have the original Owner Manual for the car? If so, the code number and how to enter the code is usually left in there (unless the original owner took it out.). There is a way to get a new code, but let's not go there just yet (after all "you just a girl" ). :~)

It's usually printed in the owner manual. If you don't have the owner manual, you will need to go to a dealer and have them generate a code.

Either that, or join an Audi or VW forum on the Web and see if you can find a mechanic who will generate one for you using the dealer software.

TRY 4035

hold rbds and pscan till you see numbers then use the radio memory buttons to control the number you want to put in after the numbers are put in hold rbds pscan again till u see it says safe and radio works.