SOURCE: 1999 Jeep wrangler, loose cigarette lighter
Hard to tell exactly from your short post, however, there may be a large retaining nut on the back of the lighter behind the dash panel. Or possible a large clip that retains it. I would check there first.
SOURCE: cigarette lighter doesn't work
before u pull panel, check for 12vdc with voltmeter inside lighter socket. If u have it, then clean contacts and/or replace lighter(not socket, wiring is fine) May save a lot of work. If you don't have voltage are you 100% sure you have right fuse and not the one below, above, or next to it? I still make mistakes with numbered fuses, which number is for which fuse. To make sure I start counting at 1.
SOURCE: 2006 jeep liberty cigarette lighter problem
its probably not the lighter itself, it's probably lost power. check the fuse for the cig lighter and see if blown. if it is, replace. if it blows immediately you have a dead short. if not, pay attention to when it stops working. could be a problem with whatever you are plugging in, or something else on the circuit
SOURCE: 2006 Jeep Wrangler cigarette lighter not working
Check for un-isulated connection on the hot wire lead. It might have been after-market but on mine the connection would short out, blowing a fuse. 1 inch of heat shrink tube fixed the problem.
360 views
Usually answered in minutes!
×