I used the 4x4 to drive home from a snow storm and now it's stuck in 4 wheel drive. How do I get it back to 2 wheel drive?
Drive ?? through the front door ?? of the closest jeep dealership!!!!!!!!!!
On
these issue, there are few solved help links for troubleshooting the
issue easily.------- Click
the link below: --- http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html ----------- http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html ------------- http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html -------------- http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html ------------ http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html ---------- http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html ---------- http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html ---------- Traction
control switch will not engage on 4WD High or Low http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html ----------- 4WD light
flashing and 4WD will engage after few minutes http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html ------------ http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html ---------- http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html ------- ------------- http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html ---------- http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html ------------- These
details will help. Thanks.
No 4x4 light on dash?
4X4 Truck makes roaring
noise in the front end?
Car will not go into 4WD
high or 4WD low?
No 4x4 light on dash?
4 wheel drive system will not disengage?
4WD light is flashing and
beeping? NO 4WD high?
2002 Jeep Wrangler: 4WD Idiot Light is ON?
2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?
4x4 front differential will not engage the
axle on ford?
4x4 will not engage on Ford F150?
http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html
Dodge Ram 4x4
light keeps flashing
4X4 LOW LIGHT
IS FLASHING ON DASH
Ford 4x4 front wheels will not engage?
SOURCE: 4x4 wont work in a 97 jeep
The only Solution to this is 1 of 2 Things ! The Shifter Linkage is Off of the Transfer Case 2 The Transfer Case is Shelled out and needs to be Rebuilt. Check underneath on the Transfer case for any Noises when in 4X4 and Check the Linkages. Please Rate my Response, I need all the Help That I can Get! Thanks!
SOURCE: 1993 jeep grand cherokee laredo 4 wheel drive
I'm not absolutely sure on the tire size for the jeep itself, but I think they are 225/65/R15's. Not absolutely sure.
As for the noise, from your explanation, it sounds like the transfer case is under a heavy bind. Take it off of the road in some grass or dirt and then move it forward a few feet then simply hit reverse. Don't move much maybe an inch and it may release the bind. Once you get the bind off the transfer case, it should slip out of 4wd, unless there is damage in the case/shifter itself.
When operating four wheel drives, with tires of different sizes it causes extreme stress on the gearing in the transfer case. Larger tires don't turn the axles as much as smaller tires. So, this causes stress in the driveline as the front is actually turning slower then the rear. In turn, this will put so much pressure on the gears that it could cause damage and the shifting mechanism will not work correctly to pull it out of 4wd engagement.
Try those ideas, and see if you can get it out of 4WD. Definitely put four tires on the jeep that are all the same size. This will keep you from having excessive stress on the transfer case and gearing therein.
I hope this helps out buddy.
SOURCE: Service 4 Wheel Drive Switch
this seems to be because either the connection to the solenoid is loose or faulty or the solenoid is not activating. the transmission control module sends a signal to the solenoid to activate it. you get the light because the ecm detected that there is a a problem with the circuit. this is due to the fact that there is a voltage value to the solenoid and it is out of operating parameters
SOURCE: 1999 jeep grand cherokee all time four wheel drive will not engage
Sounds like the splines on your transfer case gear are ground down
SOURCE: How to shift a 1998 jeep grand cherokee into 4 wheel drive
Four low is almost never used. I use it on very steep rocky or muddy trails in the woods or to pull someone out of mud or a ditch. Though some will shift standing still it is best do do this while rolling. Four high can be shifted at low speeds of 2 to about 35mph (higher also but not really good idea) Low can only be shifted between 2 to 10mph. If you find yourself stuck and unable to shift because you aren't rolling you can also turn the engine off, engage the transfer case and re-start. That avoids having the gears clashing together. Best rule is if it begins to grind, don't force it.
1,275 views
Usually answered in minutes!
×