Have 97 dakota v6 i keep replacing 1391 andpo351 plugs and wires

SOURCE: codes 0351 and 1391 after a transmission change. I

clear the codes and see if they return as hard codes,if they do double check no wires got pinched between tranny and engine when installed.

SOURCE: 97 dodge dakota. Tried to replace the heater

There is some wire shorted to ground during the dash work due to some pinched points. Need to revisit the re-installation work.

Archaeology

• 662 Answers
• Posted on Mar 15, 2011

SOURCE: PLUG WIRE ORDER ON THE DISTRIBUTOR CAP FOR A 2001

From the 2001 Dodge Dakota maintenance manual.
Note the numbering of the 6 cylinders and the arrow indicating front of engine.
Firing order: 1-6-5-4-3-2, with distributor rotating clockwise.

SOURCE: i have a 1993 dakota 3.9 v6 replaced fuel pump,had wiring checked, and replaced cluster but fuel gauge still doesn't work any help would be greatful

Was the sending unit replaced

You say you had something done or checked

We have over 300 new people a day, come to this
site alone, that have not found a repair shop or dealer
that can resolve anything, at all

Why is that,I ask?

I have 1992 dakota factory manuals from mine old one

If you get specific about serious wire chasing I will
look things up for you.