2007 Nissan Quest 3.5 Minivan Logo

Related Topics:

A
Anonymous Posted on Dec 20, 2012

Horn not working 2007 nissan quest - 2007 Nissan Quest 3.5 Minivan

  • JEMAL ALI BAADAYE
    JEMAL ALI BAADAYE Dec 16, 2015

    MY NISSAN QUEST 2007 HORN IS DEAD NEED HELP PLEASE HOW I FIX THANK YOU
    WHAT CAN I DO NEED HELP PLEASE

×

1 Answer

Clay Hendrix

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

  • Expert 41 Answers
  • Posted on Dec 16, 2015
Clay Hendrix
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Joined: Dec 16, 2015
Answers
41
Questions
0
Helped
13126
Points
106

  1. The horn could be unplugged or the connection could be dirty.
  2. The wires in the leading to the horn could have been damaged.
  3. The fuse could be bad. Check the Owner Manual to see which fuse and check it. Usually the horn is on a fuse with other devices. If the other devices are not working as well, then the fuse is a likely suspect.
  4. Rarely, the horn itself is faulty and needs to be replaced.

4 Related Answers

Anonymous

  • 4803 Answers
  • Posted on Oct 24, 2009

SOURCE: where is the 1997 nissan quest horn located ?

The two horns (High Pitch and Low Pitch) are located under the left headlamp area behind the front bumper facia.

Testimonial: "Thanks dttech for your quick response. I would look into this. Very helpful !"

Ad

Anonymous

  • 144 Answers
  • Posted on Oct 10, 2009

SOURCE: I need to replace my Nissan Quest 2007 in cabin micro filter

I'm going to send you exploded view of the glove box and the in cabin micro filter cover illustration. Remove the two upper screws on the glove box and carefully pry metal clips loose.
Disconnect glove box lamp electrical connector. Do not let glove box assembly hang from glove box lamp harness.
Remove three lower screws and remove damper clip from glove box door. Separate glove box housing and passenger instrument lower panel.
Remove three screws and remove in cabin micro filter cover.
Remove in cabin micro filters from front heater and cooling unit assembly.
Note When installing two new in cabin micro filters ensure that the filters are facing in the direction indicated by the direction arrow for the airflow. Direction arrow is printed on side of in cabin micro filters.
Install in cabin micro filter cover. Reinstall glove box.12eb879.gif63a72f6.gif

Testimonial: "Finaly I found the air flow door with three screws and removed it. The filter will need replacement soon. It is been replaced one time at the dealer."

Anonymous

  • 15 Answers
  • Posted on Jan 03, 2010

SOURCE: 2007 nissan quest, brake lights have stopped

how about criuse control it also not working you may have bad switch 3 wire switch at brake pedal are harder to diagnos 2 wire one wire has power till you press the pedal most all cars brake light is fusible link or special fuse for it is on all the time. If no pwr even with key off at the brake switch key on or off on any wires then you may need to find pwr. to the system , Note if any fuses are burnt repalce them same type if that fixes something yeah but it also may return .

Anonymous

  • 30 Answers
  • Posted on Apr 21, 2010

SOURCE: how do I change an air filter on an 2007 nissan

This particular model does not come equipped with a Cabin Air Filter.

Testimonial: "thanks but the manual said it does "

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2007 nissan quest horn does not work, however the fuse is good but it seems where you press for the horn in the steering wheel is bad.

Disable air bags to work on steering wheel. Take it apart and replace the mechanism for the horn
0helpful
1answer

My 2007 Nissan quest horn stopped working

when pushing on the horn pad if you hear a click then the system is working from the pad to the relay. check for power at the horn connection plug if you have power then the horn is bad.
1helpful
1answer

Re: 2006 Nissan Quest - horn does not work -tried changing the fuse and the relay but still horn is dead

Was the fuse you changed blown ?
Did you test the Relay?

Did you not put battery voltage directly to the horn
first, to see if it worked?

Can't do all you did without knowing how those items
work & how to test them

You have to work off wiring diagrams, to learn the circuit
& decide how & where to test it, to find the fault
0helpful
1answer

My horn stop working

Most of the time it is the clock spring, is the air bag light on too?
1helpful
1answer

Horn stop working

Check the fuse, good? Switch relays with a known good relay of the same type, still no good? Check for power at the horn, should be 12v present with horn applied. If so, you need a new horn.

I’m happy to assist further over the phone at https://www.6ya.com/expert/samuel_dda9c48bb7ffbfd3

0helpful
2answers
Not finding what you are looking for?

3,461 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...