The back 3 spark plugs are located under the manifold. Is it as simple as unscrewing the 7 bolts- 5 up front and 2 in the back- lifting the manifold and changing the plugs or is it more involved?
That is what you have to do on a chrysler v-6, also-remove the intake manifold. Be sure and use a new gasket for the manifold. Also check if there is a holding bracket for the manifold on one side or the other, or both as on a chrysler.
SOURCE: 2001 hyundai santa fe 6
HI......
OK. just follow the number on the ignition coils.
And the number on the cylinders are.
The FIREWALL side are 1,3,5, Starting from the belts location.
The RADIATOR side are 2,4,6, Starting from the belts location.
The coil with number 1 go to cylinder 1. as the same way the rest of the coils and cylinders.
OK... I hope this solve your question .
THank you for use fixya.
SOURCE: how to change spark plugs on hyundai 2004 2.4L
Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.
SOURCE: 2.4l santa fe spark plug location
there are 2 covers that are over the plugs the first is the big silver and black cover that has four
10mm bolts remove them and then there is a small black cover that is inbetween the two humps on the valve cover i think that there 6 bolts that holdthat down remove this and the coils and plug wires are visable
SOURCE: spark plugs and wires on 2003 santa fe
why would you fix a problem that is not there.if it is fine then enjoy it.plugleads only get changed if faulty.
SOURCE: how do I change (and find) the spark plugs
To find the spark plugs you will need to remove the plastic cover from on top of the engine. For the best instructions on how to change them go to www.autozone.com. Purchase is not necessary to use to use the repair guides
483 views
Usually answered in minutes!
×