I had bought a 4L60e but then I found the electronic connectors are different. Two different types of 4L60e. How do you know the difference that is needed? I had bought a 4L60e but then I found the electronic connectors are different. Two different types of 4L60e. How do you know the difference that is needed?
You can't post conmments that contain an email address.
They used 2 different transmissions eighther a 4L60E,or a 4L80E you can usualy tell by the amount of bolts in the pan check with local autoparts dealer for exact number each has
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Transfer case is bad. My first guess. If the transmission were bad it wouldn't move at any position. Is there any noise? You have 4 possibilities, Front and rear differentials, transfer case, and the transmission.
Check the trans serial/ model numbers to get better info. The only changes could be the gearing ratio's for different models. Go online to one of the bigger 4X4 owners forums and see if its answered there.
there are a few differences in 96 there is a range indicator switch which also works as a neutral safety switch mounted on the selector shaft. if the 93 tranny is original it wont have the bosses to mount that switch.
Unless you have the 6.0 ltr motor and towing package the maximum should be about 7,500 lbs. This will be less if you have the small V8 or 6cyl motor It all depends on the motor and towing package. The 6.0ltr will give you above 10,000lbs towing capability, if your truck is set up for this. I don't think you can get the 6.0 in a half ton model though, it must be 3/4 to one ton models.
Not without a little adapting. The 1993 has a 4l60e which is electronically controlled and has shift solenoids. If the 83 is an overdrive it is a 700r4 which is the same trans but not electronic. If you put it in the speedo wont work and you will need to install a T.V. cable so the transmission will shift. The 93 won't go forward or backwards?
I had bought a 4L60e but then I found the electronic connectors are different. Two different types of 4L60e. How do you know the difference that is needed?
×