I have a 2000 ford windstar i am working on it canks but wont start i replaced feul pump and have very little feull comeing out the rail i replaced the relay due to not hearing the hum sound and replaced the feul filter and the fuse for the feul pump and nothing helped i know the iteria safety switch is not tripped due to the red button being fully depressed any thoughts
SOURCE: 2000 FORD WINDSTAR will not start
there should be a relay switch on the passanger side in the floor board up to the firewall or look in the manual for it.... if your car wont start cause its starvin for gas it could be the fix...find the switch or button and press it it restarts your fuel sending unit
SOURCE: 2000 FORD WINDSTAR 3.8 NO POWER TO FUEL PUMP TRIED
check fuses
Testimonial: "Thanx that was it. Did not think relay would work with bad fuse."
SOURCE: 99 Ford Windstar. Not getting any power to the fuel pump
first check the fuse if it is good then check for power at the relay
SOURCE: WON'T START AFTER BATTERY REPLACEMENT
Probably a security system, battery was unhooked.
Some Fords also have two fuel pumps, one in the tank, and a secondary one in the frame rail.
SOURCE: 91 Ford Bronco 5.0 getting fuel to fuel rail but
check inhectors and fuel pressure regulator
236 views
Usually answered in minutes!
×