Look under truck at transmission selector cable if it disconnected [because of rust ] or damaged --the lever may be in park but the selector at transmission is in gear wont start big problem with gm trucks burbs replaced may friends 05 silverado and had to do same for my 08 yukon
SOURCE: need to locate the neutral safety switch on a 2005 chevy equinox
The park / neutral switch is on top of the transmission. It has a 2 wire connector. the wire colors are pink and orange/black. Tech jk
SOURCE: replace the neutral safety switch on my 1999 Chevy Silverado
If it looks like this:
It is mounted on the side of the tranny. It also says a special to remove it.
SOURCE: How to replace a neutral safety switch
The switch should be on the drivers side of the tranny where the shift linkage attaches to it. You will need a 13mm socket and a 15 mm socket . You will also need a heat gun , the electrical plug is glued into the connectors and must be warmed up to be removed . these rarly go bad but they do get out of adjustment / or when removing pan techs are ad to bend the shift cable bracket and get them out of adjustment . Loosen the two 13mm bolts and move it slightly in both directions and see if this fixs you problem before you change it out.
SOURCE: ocasionally engine (2004 malibu classic)wont turn
have you checked or replaced the starter relay?
500 views
Usually answered in minutes!
×