2000 Volvo V40 Logo
Posted on Jan 11, 2009

Whining noise from engine

I have a 98 Honda Accord and recently changed the timing belt, water pump, all seales, tensioner and belts. The car was quiet before all this but now it has a whining sound, more so when you press the gas pedal. Besides that the car drives fine. It's a standard shift but the whining sound is that of a automatic transmission whining. I now have 120, 000 miles on it, what could be causing this whining noise?

  • 1 more comment 
  • silverhondah Jan 12, 2009

    I have not done the screw driver thing yet but it does make sense that it would be the water pump, even though new, because I brought the car back to fix the noise and the tensioner was replaced, still the noise, so I guess I need to try to the water pump now. When I first got the car back the mechanic told me it was the timing belt making the noise and it would stop after a while, not the case. The 90 day warranty is up and I had it done at Pepboys, shouldn't Pepboys be responsible for replacing this, without charge? If I had known it was the pump from day one surely I would have had it replaced.

  • silverhondah Jan 12, 2009

    Thanks for the info, I will stop by today and see what they are going to do about it.

  • silverhondah Jan 12, 2009

    Hey Paul, I stopped by Pepboys and they pretty much say they would honor the work they did and replace the pump but if it turns out the noise is still there I would be responsible for the labor charge which is a hefty $350.00. How does the screw driver test work? Am I suppose to exert pressure on the cover with the screw driver over the cover and if it gets louder that's the source? Just want to make sure I don't throw away this money. I really do think it's the water pump because the car was quiet before belts, water pump, seals, and tensioner got changed. The mechanic at Pepboys was trying to convince me that water pumps don't make noise, they just leak when bad. I told him a mechanic who knows his stuff told me otherwise. If you don't mind just kind of explain the screw driver test, and thank you.

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that hasĀ over 10 points.

Mayor:

An expert whose answer gotĀ voted for 2 times.

  • Contributor 33 Answers
  • Posted on Jan 11, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that hasĀ over 10 points.

Mayor:

An expert whose answer gotĀ voted for 2 times.

Joined: Jan 08, 2009
Answers
33
Questions
1
Helped
20787
Points
83

Hello
altho new you may have a whining water pump or tensioner or it may be over tensioned.

take a long screw driver & place in on the timing cover to try to here where the noise is coming from, this should help you find the proplem with the car
Regards Paul
www.limotec.co.uk

  • 1 more comment 
  • Anonymous Jan 12, 2009

    Hello

    If the mechanic told you it was the timing belt making the noise and it would stop after a while, Then pepboys should stand by & do the repair free of charge as the items fitted are fulity. The 90 day warranty by Pepboys means not a thing if the car left them makind a noise, So Pepboys are responsible for replacing this, without charge?.



    You must remenber the Customer is alway right it not take it up with the head office of pepboys.



    To contact Customer Service.


        Phone: 1-800-737-2697 select prompt "3"


        Pep Boys Company Directory
        Pep Boys' Store Support Main Number.

        Phone: 1-800-PEP-BOYS (737-2697)

  • Anonymous Jan 12, 2009

    Hello



    Im glad that there are being some what helpful,



    What you need to do with the screw driver is put as close to the water pump as you can get,then put your ear to the end of the screw driver then move it to diffarant places on the timming cover to see it the nosie is the pump for sure.

    Regards Paul

    www.limotec.co.uk

  • Anonymous Jan 12, 2009

    Hello



    by the way make them change the tensioner as they fitted that as well

    Paul

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Engine makes whining sound

Take the belt off and spin all of the pulleys. the bad component should be obvious. high pitch whine is usually alternator bearing for the 98 3800 its timkin part# 100ccab or it can be the power steering pump(but the pitch will change as your steering if it is that) water pump, idler and tensioner pulleys(if you have to change either one, replace the tensioner itself). if you have the supercharged model there are a few parts that can whine( or the s/c is low on oil.)
0helpful
1answer

1992 Honda accord, whining noise, near belts when car is on.

It is most likely your power steering pump. Of the three items that have belts on that side of the engine, the power steering is on the top, then the alternator right underneath, and then the AC compressor is way down on the bottom (if you have AC). Make sure you have enough power steering fluid in the reservoir. If you need to fill, make sure it's approved for use in Honda engines. If you think the noise is coming from under the black plastic that is right on the side of the engine, you need to take it in to get looked at ASAP. That could be a bad water pump or belt tensioner and if one of those breaks your engine will get trashed.
2helpful
2answers

What else needs to be changed when doing a timing belt on a 1999 honda accord? and about how much should it cost?

Technically, nothing else needs to be changed when replacing a timing belt, however it is recommended or suggested to replace the timing belt tensioner and water pump while doing the belt. These items are only accessable when doing a timing belt. The cost should be under $100.00
3helpful
2answers

How do I know if I need to change my timing belt on a 1991 honda accord automatic

hi on your year it should be changed every90,000 mils i would advise changing the water pump at the same time please rate this answer thanks
1helpful
1answer

Noisey drive belt, possibly alternator, belt

sounds like idler bearings but you have to release the tension to check,Also you can check the rest of the pulleys also at this time. I dont think you have to drop the engine.
1helpful
2answers

I want to change the timeing belt for a 90 honda accord anyone know the time settings

jack up on stands, remove LF wheel and water shield. disconnect battery, buy a crankshaft pulley holding tool from OTC, swing p.s. reservoir out of the way, remove both accesory belts, front motor mount, valve cover, dipstick and tube, crank pulley, timing belt cover, set engine at TDC #1 (align marks), remove nut on tensioner shaft to loosen both belts, remove the belts and tensioners (replace all), replace water pump NOW, install timing pulley, reinstall spring (use dipstick tube bolt to hold back the timing pulley with the slot in the bracket on the pulley until the belt is installed), install balance shaft belt, pulley and spring, once tensioned rotate engine once and retension by loosening the nut and retightening. Make sure the marks are still lined up, and reinstall everything. New valve cover gasket set with silicone in the corners. fill with coolant and bleed system once finished. it is a good idea to also change all the oil seals while you are in there.
1helpful
2answers

2000 Honda Accord's Timing Belt and Water Pump

sounds like your timing belt is a little to tight and the vibration from the belt is the humming you here
loosen the belt but you may want to call the dealer for the spics on tightness of the belt . thx
Not finding what you are looking for?

1,420 views

Ask a Question

Usually answered in minutes!

Top Volvo Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...