What fuse is used for reverse light in a 1998 ford f 150

oneStan

• 617 Answers
• Posted on Feb 15, 2010

SOURCE: 1998 ford f 150 will not turn over lights go out

This is a connection problem. When you attempt to draw high amps the system is actually breaking away from the voltage. You'll also need to make sure the battery is fully charged & tested as bad starting connections also mean bad charging connections.

This is generally the terminals at the post but can be the connections to the starter &main fuse wiring connections as well as the ground connections..

Use emery cloth or sandpaper on all corroded areas & apply vaseline or di-electric grease, or just axle grease to the areas to prevent further corrosion & to seal the area a bit. That includes the post & the terminals once cleaned completely & reinstalled. Since your vehicle is a 98 model, when the cables are removed bend them back & forth to see if you hear noises. These can fill with corrosion that kills voltage & have to be replaced when that happens.

Remember: always remove the Neg (-) cable first and install it last when working on your vehicle.

good luck.

SOURCE: Where is the horn fuse

under the hood, in the engine compartment fuse block, witch fuse is indicated on the fuse block lid diagram

SOURCE: I need to know the

If you are talking about the trailer tow stop / turn lights, this is in the Engine Mini Fuse panel, which is not documented in the 199 Owners Manual for some reason.

It is in the 1997 OM.




If you want a better picture, you can download the 1997 Owners Manual from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Here is a picture from a 1998 MY truck, the cover is off of it.


Here is a picture from the Top that shows the relay block as well ( not documented too well in the 1998 OM either )