2009 Jeep Liberty Logo

Related Topics:

A
Anonymous Posted on Nov 27, 2012

Power door locks not working in 2009 jeep liberty

5 Related Answers

Anonymous

  • 137 Answers
  • Posted on Jan 19, 2009

SOURCE: Inoperable Power Window 2006 Jeep Liberty

the window regulator needs to be replaced

Ad
thecanfields

Ms. Blue

  • 2 Answers
  • Posted on May 10, 2009

SOURCE: Drivers side door power locks and windows control doesn't work.

PULL THE DOOR OFF MAKE SURE THE 2 LITTLE DOOR HANGERS ARE CONNECTED TO THE SWITCH MECHANISM IF IT IS. THEN YOUR SWITCH IS BROKE. GO TO SCHUCKS AND ASK THEM IF THEY CAN ORDER YOU A WHOLE NEW DOOR LOCK SWITCH ASSEMBLY. REWIRE AND TAA-DA!!!

Anonymous

  • 161 Answers
  • Posted on Jun 02, 2009

SOURCE: power locks on 04 jeep liberty not working

Most of the times on jeeps and all chrysler auto's they have a body control modual this is what controls your door locks , windows ect. It should be in the owners manual for all fuse location and identification. A shop with a scanner can check the door lock system for you. body control moduals go bad alot on all chyslers and if you buy one you need to buy it from the dealership they will program it . So check the owners manual for a fuse and then have the body control mod checked

Robert Debison

  • 412 Answers
  • Posted on Jun 21, 2009

SOURCE: 2002 jeep power windows and door locks stopped

SOUNDS LIKE YOU HAVE BROKEN WIRES BETWEEN DRIVER'S DOOR AND BODY AT A PILLAR..PULL RUBBER BOOT FROM BODY AND DOOR AND INSPECT WIRING HERE

Anonymous

  • 6982 Answers
  • Posted on Feb 08, 2010

SOURCE: 2001 Jeep Cherokee sport. Power door lock won't

Lock and unlock both run off the same power supply...I'd be looking for a bad switch or a broken wire in the door harness where the wires go through the rubber boot between the door and pillar.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hi I have a 2005 jeep liberty and the locks on doors quit working and radio turns on no sound stations work though

At this website
https://big-manuals.com/products/jeep-liberty-complete-workshop-service-repair-manual-2002-2003-2004-2005-2006-2007-2008-2009-2010-2011

I found so many manuals that aren't here.. Also complete, this one is not, much better language, complete manual of 800+ pages, and they also have live assistance feature
0helpful
1answer

Luz marcada con el numero cinco?

2003 Jeep Liberty- Reading Engine / Diagnostic Codes ...

? 1:13
https://www.youtube.com/watch?v=pGrPBBzp7wE
Jan 6, 2013 - Uploaded by DeathScouter
2003 Jeep Liberty- Reading Engine / Diagnostic Codes ..... error code will flash 2 times, brief pause, flash 1 time, pause, flash 5times, pause, ...

2005 Jeep Liberty possible cause of P0442 error. - YouTube

? 5:26
https://www.youtube.com/watch?v=2ba-gH0gadg
Dec 21, 2014 - Uploaded by TheBGravit
While replacing a bad fuel pump I believe I found the cause of a P0442 Error code. I was able to repair the ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - My jeep Liberty 2009 does the same the Dashboard showed a code of cylinder .... i have a jeep liberty 2006 with the # 5 cylinder misfire. i replaced the sparks... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the ... 2002 jeep liberty camshaft posistion sensor error code p0340 5 answers.

Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Recently got a second hand 2005 Jeep Liberty Sport. Everything worked fine ... #5intake valve seat dropped and held open the intake valve. 2008 Jeep Liberty.

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305


0helpful
1answer
0helpful
1answer

2009 jeep liberty only drivers door unlocks

you just get this car.
or it worked before but not now? key questions.

door switch driver and RKE not working right.

and some cars the driver has a master switch and local switch.
and some have a kids safe switch that kills the other doors.
i dont have the opr,guides. for liberties.

in this case , this is a programmable feature. most newer jeeps.
you can program most cars. for (only driver door works with fob)
this is for security, (like airport parking , alone, at night)
the operators guide (lost already )covers this. in the glove box.
most folks don't read it ,they just drive to jeep service and
ask to have it set like you want. and pay $100.
it could be a fault too... but that will take checking above first.
on my other car, i must click 2 times to open all doors, (GM)

the dealer will scan the PCM/BCM puters. to see if they are throwing
DTC errors. any good scan tool can do this.
and check fuses first. never last. or get egg in face.

did you read this?
http://justgivemethedamnmanual.com/jeep/jeep-liberty-owners-manuals/

lost it , then get it and put it on a flash stick and put it back in the glove box or burn a CD . (or kill a tree and print it)

page 21
To Unlock the Doors and Liftgate
Press and release the UNLOCK button on the RKE
transmitter once to unlock the driver's door or twice to
unlock all doors and the liftgate. The turn signal lights
will flash to acknowledge the unlock signal. The illuminated
entry system will also turn on.

Remote Key Unlock, Driver Door/All Doors First
This feature lets you program the system to unlock either
the driver's door or all doors and the liftgate on the first
press of the UNLOCK button on the RKE transmitter.
To
change the current setting, proceed as follows:
• For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to "Remote Key
Unlock," under "Personal Settings (Customer-
Programmable Features)," under "Electronic Vehicle
Information Center (EVIC)" in Section 4.

end quote.

my GUESS, you didnt RTM.
read it.
0helpful
1answer

Power locks not working

lots of issue
find an ASE mechanic and its done.
DIY? got tools?
if you have DMM , voltmeter
then read the topics in the FSM or at alldata.com.
0helpful
1answer

My 2009 Jeep Liberty will turn on but the instrument panel will not?

sounds like lock cylinder is shot
but google jeep liberty forums and post there
0helpful
3answers

My door locks quit working.

Go to online store reliable they have repair manuals I am sure you will get the solution. Here's the link
Best Manuals
0helpful
1answer

My automatic headlights stopped working on my 2009 Jeep Liberty. I can turn them on manually.

My 2008 jeep liberty's headlights flickered when I was just driving down the road in the dark and then completely shut off on me. My fog lights are the only lights that work now and my lights continue to blink off and on a couple times and then completely off. Now that this has happened my jeep will continue to lock and unlock itself and also my blowers for heat and cool air will not blow at all...
3helpful
2answers

Power locks on 04 jeep liberty not working

Most of the times on jeeps and all chrysler auto's they have a body control modual this is what controls your door locks , windows ect. It should be in the owners manual for all fuse location and identification. A shop with a scanner can check the door lock system for you. body control moduals go bad alot on all chyslers and if you buy one you need to buy it from the dealership they will program it . So check the owners manual for a fuse and then have the body control mod checked
Not finding what you are looking for?

2,851 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...