Your e-brake cable that is connected to back brakes could be binding,cable could be bad,remove both bake drums and inspect brake shoe with cable connected to it.Also check inside drum for scoring and brake shoes,if worn uneven,replace both sides.
Do you see abs or brake light flashing on.problem could be emergency brake out of adjustment.if you see ABS AND BRAKE LIGHT FLASHING ON PROBLEM COULD BE IN THE ABS BRAKE UNIT OR MASTERCYLINDER.BEND DAMAGE RESTRICTED BRAKE LINE OR HOSE.
SOURCE: turbo installation on 1996 nissan 200sx
That vehicle never came with a turbo as an option. Therefore adding a turbo would be custom work. You may find someone online who has documented their modification process. If you purchase an aftermarket turbo system it will come with a manual. Short of that such a document does not exist.
SOURCE: replacing the belts for a nissan 1995 200sx
http://www.2carpros.com/car_repair_information/year/1997/make/nissan/model/200sx/1997_nissan_200sx_drive_belt_routing_diagram.htm
SOURCE: My daughter has a 1996
Hi. Brake light switch is located at the top of the brake pedal. Possible you need to adjust the switch or replace it. Please see picture below.
SOURCE: where is the brake light switch for a 1996 nissan
It's above the brake pedal and looks like the picture below.
SOURCE: Nissan sentra 200SX cranks over but won't start
check fuel pump, fuel pump fuse, distributor,and ignition coil please. then you will need to check crank position sensor.(to do this you need to find factory service manual)
117 views
Usually answered in minutes!
×