SOURCE: Replacing the heater core on a '88 Plymouth Sundance?
Behind the dash. You will have to pull the whole dash assembly. It looks like a little radiator.
SOURCE: Where is the speed sensor location on a 1999 plymouth grand
<img src' "http://www.2carpros.com/forum/automotive_pictures/170934_plymouth_voyager_1.jpg" />
This is a diagram of where and what it looks like. Its located on the back side near the firewall on your transmission. GOOD LUCK!
SOURCE: What does a MAP Sensor look like, where is it
So you dont know where it is, or what it looks like, but you know its bad, and need to replace it? Its on the end of the intake plenum, 3 wires, once you find it, you will figure out how to replace it.
SOURCE: where is the relay located for the turn signals on
your fuse block is located behind the steering column cover acessible by removing the fuse access panel above the hood latch release lever.the relay and flasher module is located behind an access panel in the glove box.included in the module are hazard and turn signal flashers along with time delay and horn relays.you have additional relays mounted on the inner fender panel near the battery and strut tower.
SOURCE: Where can I find the map sensor in a 1994 plymouth
For 1994 Plymouth Truck Voyager
2WD 3.0L MFI 6cyl the MAP Sensor is located
under hood, passenger side, upper engine area, end of
intake manifold cover, mounted next to alternator
on engine.
Hope helps (remember rated this).
159 views
Usually answered in minutes!
×