At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Harold, According to the 2002 Ford Focus Owner manual,
With engine oil filter change : 2.0 liter SPI engine takes ( 3.78 liters / 4.0 U.S. quarts of 5W-20 )
2.0 liter Zetec engine takes ( 4.25 liters / 4.5 U.S. quarts of 5W-20 )
links below talk more about what they think oil should be used. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
depending on trans and engine mount type the mark my be on flywheel but generally most cars it is located on the belt pulley attached to crank rod, center bottom one on engine block. the timeing mark should be visable from top looking down. if you use a big ratchet to turn over the engine by hand and go slowly, you should see thhe marks pass as you do so.
Look at the timing cover , if it's metal and held on with several bolts it has a chain , if its a plastic cover it has a belt. If a belt align the timing marks on the pulley and cover,align the camshaft gear mark on the head or block.
No marks to align camshafts, set crankshaft at TDC, align camshaft as shown, to align, lobs on cylinder #1 have to be pointing out at 45 deg, on the other end of camshaft's will be a slot on each one insert some thing through both as shown, to hold camshaft's in place.
looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows:
x x x x x
10 4 2 6 8
x x x x x
7 5 1 3 9
torque all down to 15 ft lbs
torque to 30 ft lbs
plus 90 degrees.
Good luck!
A proffessional can do this in about an hour and a half. It could take you a full day unless you know the basics, and some tricks far too many to list.
need timing marks diag for ford focus 2002 sohc 2.0
×