When I rev my 97 crown vic it revs continously and wont stop until i stop pressing the gas. is this a transmission sensor problem or anything else?

SOURCE: we have a problem with a 1992 crown vic. It bogs

run a presher test on your fuel pump.check your fuel filter. have nice day

SOURCE: 1985 Ford Crown Vic won't shift sometimes. Seems

Have he transmission drained and the screens cleaned

SOURCE: (90 crown victoria)when i pull off from a stop,da

sounds like your having transmission problems. check fluid first if that doesnt help have it checke out

SOURCE: 97 Crown Vic transmission issue

Check the transmission linkage cable that runs from the steering column under the dash to the trans under the car. make sure that the cable is not damaged and that all connections are tight.

SOURCE: 1998 crown vic Im having random misfires code

Now you go to a repair shop, and have it diagnosed

You have other codes for the coils,forget the PO300

You will need someone good with ford ignition issues,
to resolve the misfires, and possible do some other
preventative maintenance work,as the stalling is
another problem